The Story
Goodridge Brake/Clutch Banjo Fittings to suit Goodridge -03 sized 600 Series brake hose. Each fitting is supplied with the necessary olive and socket to aide fitment to the Goodride Brake Hose.
Goodridge Banjo's available in a range Material and a range of Angles (Degrees) making it possible to fit to hard to access cylinders and pedal boxes.
CONSTRUCTION
- Suitable for -03 Smoothbore Teflon (PTFE) Hosing Only**
- 600 Series banjo's allow for all time alignment with swept angle.
- Stainless Steel Material
- Hole Size to suit 3/8 or 10mm Banjo Bolt
- Each fiting contains an Olive which must be fitted between the Steel Braid and the Teflon Lining so it can be compressed by the socket:
REPLACEMENT SOCKETS & OLIVES
APPLICATIONS
- Brake
- Clutch
COMPATIABLE HOSING
5096 - PART NUMBERS
GOODRIDGE MATERIAL KEY:
- B: Brass,
- C: Stainless steel,
- CH: Crome plated,
- D: Anodised Aluminium,
- P: Zinc plated carbon steel,
- Z1: Silver plated carbon steel.
RECOMMENDED BANJO ASSEMBLE WITH BANJO BOLT:
With the suitable Banjo Bolt to Suit the desired Banjo Hole, place a copper washer either side of the Banjo to create a sealed fitment when tightened.
**Please note that the washers internal diameter must also match the Banjo Bolt size to ensure it is a sealed fitment to avoid leaks and loss of pressure.
Description
Goodridge Brake/Clutch Banjo Fittings to suit Goodridge -03 sized 600 Series brake hose. Each fitting is supplied with the necessary olive and socket to aide fitment to the Goodride Brake Hose.
Goodridge Banjo's available in a range Material and a range of Angles (Degrees) making it possible to fit to hard to access cylinders and pedal boxes.
CONSTRUCTION
- Suitable for -03 Smoothbore Teflon (PTFE) Hosing Only**
- 600 Series banjo's allow for all time alignment with swept angle.
- Stainless Steel Material
- Hole Size to suit 3/8 or 10mm Banjo Bolt
- Each fiting contains an Olive which must be fitted between the Steel Braid and the Teflon Lining so it can be compressed by the socket:
REPLACEMENT SOCKETS & OLIVES
APPLICATIONS
- Brake
- Clutch
COMPATIABLE HOSING
5096 - PART NUMBERS
GOODRIDGE MATERIAL KEY:
- B: Brass,
- C: Stainless steel,
- CH: Crome plated,
- D: Anodised Aluminium,
- P: Zinc plated carbon steel,
- Z1: Silver plated carbon steel.
RECOMMENDED BANJO ASSEMBLE WITH BANJO BOLT:
With the suitable Banjo Bolt to Suit the desired Banjo Hole, place a copper washer either side of the Banjo to create a sealed fitment when tightened.
**Please note that the washers internal diameter must also match the Banjo Bolt size to ensure it is a sealed fitment to avoid leaks and loss of pressure.
